Specifications:

WENDT CNC PERIPHERY GRINDERS ( 8 MACHINES AVAILABLE )

4 SERVO AXIS MACHINES WITH PRECISION FEEDBACK CONTROLLED BY A FAGOR MODEL 8050 COMPUTER WITH FAGOR SERVO MOTORS AND DRIVES.

THESE MACHINES WERE COMPLETELY REDESIGNED AND RE-MANUFACTURED TO PROVIDE COMPLETE PERIPHERY GRINDING INCLUDING RADIUS TO FLAT AND RELIEF ANGLE GRINDING.

BLANK CARBIDE INSERTS GROUND TOP AND BOTTOM  ARE LOADED INTO A MAGAZINE FEED SYSTEM THAT LOADS THE PART INTO THE ROTATING HOLDER.

THE HEADSTOCK IS EQUIPPED WITH A (SOUND ACTIVATED DEVICE) THAT ALLOWS THE GRINDING WHEEL TO ADVANCE TOWARD THE PART AND FIND THE SURFACE OF EACH SIDE AND THEN COMPENSATE TO BALANCE THE STOCK REMOVAL.

THE AXES ARE :

·          WHEEL HEAD OSCILLATION STROKE LENGTH

·          ROTATION OF THE HOLDING DEVICE USED TO GENERATE THE SHAPE OF THE INSERT LOOKING DOWN ON THE FLAT.

·          ROTATION OF THE BASE USED TO GENERATE RELIEF ANGLE

·          WHEEL HEAD FEED IN AND OUT. USED TO OBTAIN SIZE AND GENERATE RADII ON THE PART CORNERS.

PROGRAMMING IS INTERACTIVE  

AUTOMATIC DRESSING CYCLE

AUTOMATIC WHEEL WEAR COMPENSATION

THESE MACHINES WERE USED FOR THREE YEARS BY A MANUFACTURER OF SPECIAL SHAPED CARBIDE INSERTS AND THEY OPTED TO PRODUCE STANDARD SHAPES ONLY AND NO LONGER NEED THE CAPABILITIES. THE MACHINES WERE CHARTED FOR PERFORMANCE AND HELD TOLERANCES OF .00005 ON A CONSTANT BASIS.

For more information contact: sales@rogersmachinery.com