 |
PROJECT: DESIGN AND BUILD A SPECIAL FOUR AXIS TWIN SPINDLE LATHE FOR A SPECIAL PART FAMILY. THIS MACHINE USES OUR DESIGNED WELDED STRUCTURE WITH EPOXY CEMENT FILL. THE CNC IS G.E. FANUC AND THE SLIDES ARE RUSSEL T. GILMAN, THE TURRETS ARE SAUTER AND THE REST IS OURS. WE HAVE BUILT 7 OF THESE MACHINES THAT ARE RUNNING IN THE USA AND EUROPE.
( CLICK PHOTO TO SEE THE
ENTIRE PROJECT ) |
|
|
PROJECT: DESIGN
AND BUILD A 6 SPINDLE CNC GUN DRILL FOR A SPECIAL PROJECT. AFTER PROVING
SUCCESSFUL WE BUILT 3 OF THESE MACHINES THAT ARE RUNNING IN THE US AND EUROPE. THE MACHINE DRILLS HOLES 15 INCHES DEEP AT 30 INCHES A MINUTE IN SIX PARTS. SPINDLE MONITORS WATCH FOR TROUBLE AND IDENTIFY THE SPINDLE IF AN OVERLOAD IS SEEN.
( CLICK PHOTO TO SEE THE ENTIRE
PROJECT ) |
|
|
PROJECT: BUILD AN AIR CONVEYOR ACCUMULATOR FOR ALUMINUM TWO
PIECE CANS THAT ALLOWS THE CAN TO FLOAT ON AN AIR CUSHION AND TRAVEL WITHOUT
SCUFFING THE ENAMEL FINISH ON THE CAN. THIS CONVEYOR IS 120 FEET LONG AND IS CONTROLLED BY A PROGRAMMABLE LOGIC COMPUTER. THE ENTIRE SYSTEM WAS BUILD AND NUMBERED AT OUR LOCATION
AND ASSEMBLED IN A CAN PLANT IN FRANCE WITH OUR ROGER'S ASSISTANCE. THE SYSTEM WAS 15 FEET IN THE AIR ABOVE THE PLANT.
( CLICK PHOTO TO SEE THE ENTIRE
PROJECT ) |
|
Click
to go back page 1 of 3 |
Click
to see page 3 of 3 |
